Roving Networks WIFLY GSX Manuel d'utilisateur télécharger pdf (Page 9)

www.rovingnetworks.com Version 1.32r 10/9/2012 9

RN-WIFLY-EVAL-UM

Table 4. Basic set & get Parameters

Parameter

Function

adhoc

Controls the ad hoc parameters.

broadcast

Controls the broadcast hello/heartbeat UDP message.

comm

Communication and data transfer, matching characters.

dns

DNS host and domain.

ftp

FTP host address and login information.

IP settings.

option

Optional and infrequently used parameters.

sys

System settings, such as sleep and wake timers.

time

Realtime clock settings.

uart

Serial port settings, such as baud rate and parity.

wlan

Wireless interface, such as SSID, channel, and security options.

Find Available Networks

Once you are in command mode, you can instruct the WiFly module to search for available networks. Type scan <cr> in

the terminal emulator to view a list of Wi-Fi networks within range. See Figure 7.

Figure 7. Scan for Networks

Associate with an Access Point

You use the join keyword to associate with an open access point. As shown in the scan list, roving1 is an open access

point. To associate with an access point, type the following commands (refer back to Figure 7):

join roving1

join # 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Pas de commentaire

Roving Networks WIFLY GSX Manuel d'utilisateur Page 9