Roving Networks WIFLY GSX Guide de l'utilisateur télécharger pdf (Page 52)

RN-WIFLYCR-UG

www.rovingnetworks.com Version 1.2r 4/30/13 page 52

FIGURE 3-3: MODULE’S NETWORK NAME

2. Launch your web browser.

3. Type http://config to go to the home page of web server running on the module.

The page has two tabs displayed by default:

• Network Configuration—Used to set the AP?s SSID and passphrase.

• Information—Displays information about the WiFly module. This tab displays

the following information:

- WiFly module’s MAC address

- Module type (RN131 or RN171)

- List of files on the file system

- Battery strength

4. Click the Network Configuration tab (see Figure 3-4). In this tab you configure the

module’s network settings (SSID and passphrase). Configure these settings

using the following steps:

a) Enter your network’s SSID in the Access Point SSID box.

Alternatively, click the Refresh List button. The module scans for networks

and displays a list of found networks. Select your network from the Available

Access Points list or type it in the Access Point SSID box. Clicking an SSID

displays a drop-down menu with more information about that network, such

as channel, RSSI, security mode (WEP, WPA, WPA2), capabilities, WAP

configurations, WPS configuration, and the AP’s MAC address (also called

BSSID). If you do not see your desired access point in the list, click Refresh

List to scan again.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 121 122

Pas de commentaire

Roving Networks WIFLY GSX Guide de l'utilisateur Page 52