Roving Networks WIFLY GSX Guide de l'utilisateur télécharger pdf (Page 53)

RN-WIFLYCR-UG

www.rovingnetworks.com Version 1.2r 4/30/13 page 53

FIGURE 3-4: NETWORK CONFIGURATION TAB

b) Type your AP’s security passphrase in the Passphrase box.

c) (Optional) The module uses DHCP by default. If you want to assign the mod-

ule a static IP, turn off the Check to enable DHCP option and enter the static

IP, subnet mask, and gateway.

d) Once you have configured the network settings, click Save Configuration

to save the settings to the module.

5. Exit the web server by clicking Exit Web Configuration App. The module

reboots in infrastructure mode and joins your wireless network

3.2.4 Using the Advanced Tabs

Turning on the Display Advanced Tabs option (bottom right corner of the application

window) show the Terminal and Module Configuration tabs.

3.2.4.1 TERMINAL TAB

Click the Terminal tab (see Figure 3-5). In this tab you can issue ASCII commands to

configure any of the WiFly module’s parameters. The web server includes a help utility

to guide you through the module configuration. To use this feature, type help in the ter-

minal.

Note: If your wireless network is hidden (i.e., not broadcasting an SSID), it does

not display in the scan output. In this case, you must manually enter the

SSID.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 121 122

Pas de commentaire

Roving Networks WIFLY GSX Guide de l'utilisateur Page 53